
CONTROL CABINET CONNECTIONS
NOTE: The control cabinet should be no more the 30m from the door panel.
The system requirements may only require a single control cabinet to control one or more
entrances or may require a cabinet for each entrance. In some cases it may be possible to
mount multiple cabinets together and in other situations it may be necessary to have the
cabinets remote from one another (For example, when distances between door panels is
greater than 30m). The notes below should help decide the configuration required.
1. Single entrance audio system:- A single control cabinet (SP400) can be used.
2. 2 – 4 entrance audio system:- A single control cabinet (SP405) can be used if the entrances are within 30m
of the control cabinet otherwise use multiple (SP400) control cabinets.
3. Audio systems with more than four entrances:- Use multiple (SP400, SP405) cabinets as required.
4. Single entrance video system:- A single control cabinet (SP410) can be used.
5. 2 - 4 entrance video system with door panels less than 30 meters from control cabinet:- A single four
entrance video control cabinet (SP415) can be used.
6. 2 or more entrance video system with door panels more than 30 meters apart:- A single entrance video
control cabinet can be used for each entrance (SP410). Two Art.506 relays will be required for each cabinet to
switch the video power and signal.
7. Two level system (Audio or video):- A two level system means a system with communal entrances and block
entrances. We suggest using a minimum of a control cabinet per block and a control cabinet(s) for communal
entrances following the rules above.
LINKS BETWEEN CONTROL CABINETS:-
The cables shown in the diagram above are a minimum requirement. Additional cables may be
required for proximity access control, door monitoring etc.
Also see block diagrams section for more examples of cable requirements.
Komentáře k této Příručce